AutoMate Scientific : Build Your Own System

AutoMate Scientific - Ready For Research

If you would like quotations on several system configurations, please submit multiple copies of this form, and let us know it's not an accident in the comments box near the bottom. Don't worry, you are NOT placing an order - only getting a quote.

Depending on component choices, AutoMate Scientific perfusion systems include: Controller, valves, reservoirs, drippers, reservoir bracket, ringstand, 1/16" i.d tubing and four-, eight-, or sixteen-into-one micro-manifold with flow regulator.

Prices shown in right column are U.S. prices for comparison only. International prices are at least 15% higher. Prices subject to change without notice.

The "Help" links on the left may not work if you have disabled pop-up windows in your web browser.

Help

Number of channels:

4 - Example prices shown are for a ValveLink Pinch Valve System:
8
16

$1,395
$2,495
$4,695

8-ch Pinch System:

Help

Valve controller:

TTL, computer, manual control ValveLink^®
TTL, computer, manual and programmable ValveBank^®

$2,495
$3,195

8-ch ValveLink:

Help

Valve type:

Inexpensive, slow (10-20ms open/close time) Pinch Valves
Fast (8-10ms) Teflon^® Valves
Very Fast (1.5-4ms) Lee^® Mini Valves
SmartSquirt^® Micro-Perfusion System (skip the next four questions)

$2,495
$3,295
$3,685
$2,995

Help

Low-noise valve grounding package:

Yes No
(required for Europe and suggested for electrophysiology)

+ $55 per 4 valves

Help

Teflon Valve fittings top:

1/16" i.d. hose barbs
*1/8" i.d. hose barbs
Luer-lock
Nut & ferrule (add $30)

Teflon Valve fittings bottom:

*1/16" i.d. hose barbs
1/8" i.d. hose barbs
Luer-lock
Nut & ferrule (add $30)
Pinch, Lee and SmartSquirt valves have no fittings. *Standard fittings

8 channels:

Help

Pressurized system or gravity-fed reservoirs:

Pressurized 50ml
Pressurized 35ml
Pressurized Glass 35ml for volatiles
Gravity 140ml
Gravity 60ml
Gravity 35ml
Gravity 15ml

$550
$550
$850
$0
$0
$0
$0

Add gas bubblers with regulator to any gravity system
Add gas bubblers without regulator to any gravity system
No thanks.

$475
$115

Temperature control:

Room Temperature
ThermoClamp-1^® - Heated Perfusion Pencil (inline heater)

$1,470

Help

Do you need our interface cable for connecting your valve controller to interface hardware like the DigiData or ITC interface?

4-BNC cable to Axon Digidata 1320 - 1322A
8-BNC cable to Digidata 1440A, National Instruments, others
Cable to Heka EPC-9 single
Cable to Heka EPC-10 / ITC-1600
USB A-B cable for ValveLink8.2
No Thanks

$55
$99
$249
$55
$9

Do you need brackets for mounting your valve controller in a 19" rack?

Yes No

$20

Help

If you chose the ValveBank^® controller, would you like our EasyCode^® software to help program it before experiments?

No Thanks
EasyCode for Macintosh Classic - with serial cable
EasyCode for Macintosh Classic - with USB-to-serial adapter
EasyCode for PC (Windows 3.1-95)
EasyCode for PC (Windows 98SE, 2000, XP)

$0
$195
$274
$195
$249

Depending on component choices, AutoMate Scientific perfusion systems include:
Controller, valves, reservoirs, drippers, reservoir bracket, ringstand, 1/16" i.d tubing and four-, eight-, or sixteen-into-one micro-manifold with flow regulator.

Help

Perfusion Pencil^®

4-channel Pencil (perfusion manifold)
8-channel Pencil
16-channel Pencil for fast, local drug application (one tip included)

Tips for Perfusion Pencil, SmartSquirt and ThermoClamp (quantities):
100µm i.d. 250µm i.d. 360µm i.d. Flow rates

$225
$225
$350

$30 ea.

Help

Sub-millisecond piezo solution switcher

Yes No theta glass piezo switcher

$9000

Help

Fast exchange, open Oocyte chambers:

80 mm
90 mm
100 mm
120 mm stage adapter

$185

Help

Petri dish perfusion chamber insert:

Nunc - default 35mm dish
Corning
Falcon

$195

Per foot:

Extra tubing
(minimum 10ft):

1/16" i.d. Tygon
1/16" o.d. Teflon^®
1/32" i.d. Silicone pinch valve tubing

$0.52
$3.15
$2.00

Preferred domestic (US/Canada) shipping method:

Preferred distributor if any:

Anything else you'd like to tell us:

Contact Information :
Please send me information via: (check as many as you like)
	Email Mail/Post Fax Please call to discuss my needs
Name*
Institution*
Address/Dept*
Address Line 2
City*
State*	Zip/Postcode*
Country*	(leave blank if in U.S.A.)
Email*
Phone	Fax
*required - Fax or phone are also required if you would like information sent that way.
Please help us if you have a minute...
Who will be the end user for this equipment? (if not you)
How did you hear about us?
What is your position? other...
Who is the P.I.? (if not you)
Is this a new lab? (y/n)
Are you building a new workstation? (y/n)
What field are you in? specifically:
Don't worry, you are NOT placing an order - only getting a quote. Please click the button only ONCE. There may be a slight delay before the next screen appears.