 |
|
| |
 |
 |
 |
|
|
|
| You can have rapid
switching, fast wash-out, and accurate temperature control at
the same time. Set the ThermoClamp temperature from ambient to
50°C. A front-panel BNC provides an analog output of current
temperature for recording. Different sizes of replaceable tips
are interchangeable with our standard Perfusion Pencil. |
|
 |
|
|
|
|
| |
 |
|
 |
|
|
|
| The best cure for
bubbles is to pre-warm your solutions. AutoMate Scientific introduces
the BubbleStop™ Syringe Heater with integrated temperature
sensor and feedback. Set the temperature on the BubbleStop a
few degrees higher than room temperature or your inline heater,
and the warmed solutions will off-gas in the syringe reservoirs
to the maximum gas concentration for that temperature. |
|
|
|
|
|
|
| |
 |
|
 |
|
|
|
| Finally
a culture dish system specifically designed for live-cell microscopy!
Now you can have accurate temperature control and high-numeric
aperture compatibility in a convenient disposable culture dish
system that even works in confocal applications. |
|
|
|
|
|
|
| |
 |
|
 |
|
|
|
| The Bioptechs
Delta T Stage adapter reads the temperature of the Delta T Dishes,
provides electrical contacts to power the dishes and supports
the dish on the stage for translation. All Delta T systems require
a Stage Adapter. |
|
|
|
|
|
|
| |
 |
|
 |
|
|
|
| Delta T Culture
Dish System is designed to simulate host conditions on the stage
of your microscope and provide an optimal optical environment
for microscopy. The system components are, the Controller, Stage
Adapter, and Dishes. Accessories for Tissue Slice, Brain Slice,
and other specimens are available. |
|
|
|
|
|
|
| |
 |
|
 |
|
|
|
| The convenience
of a disposable plastic culture dish with the high optical compatibility
of glass. These dishes are used routinely in fluorescence, DIC,
and confocal modes of microscopy, or anywhere that the highest
image quality is desirable. The dishes with the self heating
ITO coating require a Delta T Controller and Stage Adapter. |
|
|
|
|
|
|
| |
 |
|
 |
|
|
|
| The Focht Chamber
System 3 is
a closed system, parallel plate, micro-environmental chamber
for upright microscopes. The FCS3 provides the user with all
of the functionality of the popular FCS2 but redesigned for upright
microscopes. |
|
|
|
|
|
|
| |
 |
|
 |
|
|
|
| The FCS3 Starter
set requires a stage adapter for precise positioning. Due to
the diversity of microscope stages, a stage adapter cannot be
included with the FCS3 starter kit. Custom designs are available
upon special order. |
|
|
|
|
|
|
| |
 |
|
 |
|
|
|
| The Focht Chamber
System 2 is a closed system, live-cell micro-observation
chamber, that offers several advantages over other chambers.
In addition to its unique perfusion and thermal control systems
it is fully compatible with all modes of microscopy. |
|
|
|
|
|
|
| |
 |
|
 |
|
|
|
| The FCS2 Starter
set requires a stage adapter for precise positioning. Due to
the diversity of microscope stages, a stage adapter cannot be
included with the FCS2 starter kit. Custom designs are available
upon special order. |
|
|
|
|
|
|
| |
 |
|
 |
|
|
|
| Closed-System Cooled
Chamber FCS2. Cells are plated
on a 40mm coverslip and placed into a special FCS2 chamber. This
provides a perfuseable laminar flow optical chamber with user
modifiable flow characteristics. |
|
|
|
|
|
|
| |
 |
|
 |
|
|
|
| The Objective Cooling
Collar is an attachment to an objective that provides an isolated
pathway through which a refrigerated fluid can flow. this provides
an efficient means of cooling the objective. The source of the
chilled fluid can be as simple as a dewar of ice water or as
sophisticated as an AC powered chiller bath. |
|
|
|
|
|
|
| |
 |
|
 |
|
|
|
| When using high-numeric
aperture lenses, heat is lost very rapidly from the specimen
through the optical coupling medium (oil or water) to the objective.
Control of the objective temperature eliminates this problem. |
|
|
|
|
|
|
| |
 |
|
 |
|
|
|
| Options for the Objective
Cooling Collar include: Objective Thermal Isolator & Spacer,
Stage Spacer Kit, 8mm Objective Spacer, and Objective Wrench & Pliers. |
|
|
|
|
|
|
| |
 |
|
 |
|
|
|
| Need instructions
on how to size your objective for an Objective Heater? There
are a wide variety of objective configurations. It
may be necessary to mount an Objective Heater in a different
location based on the geometry of your objective. |
|
|
|
|
|
|
| |
 |
|
 |
|
|
|
| The Micro-Perfusion
Pump is a miniature, single or dual, channel, full-featured peristaltic
pump designed specifically for low-flow rates. Unlike most peristaltic
pumps that are driven by stepper motors, the Micro-Perfusion
pump is driven by a tachometer regulated, multi-stage DC gear
motor. |
|
|
|
|
|
|
| |
 |
|
 |
|
|
|
| This intuitive
control interface system is optimized for time lapse imaging
of live-cell activity. It provides a convenient, accurate, reliable,
and repeatable method of controlling fluid and temperature for
chemically or thermally induced change experiments in live-cell
chambers. It is WYSIWYG on both Mac and PC platforms! |
|
|
|
|
|
|
| |
 
© 2006-2012 AutoMate Scientific, Inc.
|
