 |
MM-1 & MM-3
Micropositioners
These unique micropositioners
are precision instruments designed to eliminate many research
and design problems at a justifiable cost, especially in
the case of space limitations. The MM-3 is roughly 1 3/4
inches (4.4cm) in height and less than 1 inch (2.5cm) in
width and depth. The MM-1 is even smaller at a height of
only 1 inch (2.5cm).
The black anodized
aluminum body is made with a one-piece base and three piece
construction. The spring-loaded stages move on stainless
steel tracks for smooth motion and precision; maximum wobble
and straight-ness on the MM-1 and MM-3 is less than 1um and
2um, respectively.
Both models are available
in single, double, or triple stages for X, Y, and Z axes;
adding stages is an easy job and requires no special tools
or adaptors. The travel of the stages is 1/2” (3mm)
for the MM-1 and 1/2” (13mm) for the MM-3. The base
is easily adapted to most surfaces.
|
|
MM
- 3
0.20in x 0.44in x 1.03in
5mm x 11mm x 26mm
1/8in
3mm
less than 1um
less than 1um
Screw adjustments
64 TPI
60deg F to 165deg F
MM -
3
0.28in x 0.66in x 1.75in
7mm x 17mm x 44mm
1/2in
13mm
less than 2um
less than 2um
40 TPI
60deg F to 165deg F
| |
