AutoMate Scientific - Ready For Research
OUR PRODUCTS
Perfusion Systems Perfusion Systems
Pressurized Superfusion Pressurized Superfusion
Temperature Control Temperature Control
SmartSquirt® Microperfusion
Perfusion Chambers Perfusion Chambers
Rodent Fixation Systems
Brain Slice and Tissue Chambers Brain Slice & Tissue Chambers
Customize a Perfusion System
Complete Electrophysiology Rig
Amplifiers and Stimulators Amplifiers & Stimulators
MDC/Axon Instruments Heka Data Acquisition
Heka Data Acquisition Heka Data Acquisition
Siskiyou Mechanicals Siskiyou Mechanicals
Sutter Manipulators Sutter Manipulators
Micropipette Fabrication Micropipette Fabrication
TMC Air Tables TMC Air Tables
MED64 Multi-Electrode Array Multi-electrode Array
Automated Pipette Patch Clamping Automated Patch Clamping
Port-a-Patch® Planar Patch Clamping
Vesicle Prep Pro Bilayer Apparatus
Filter Wheels Optical Instruments
Functionalized Bio-surfaces Functionalized Bio-surface
Main Products Page
Download a Catalog

MSC-3 Interface Buy NowDownload Brochure
       

Microscope Interface

Microscope Stage Chamber: Interface

The MS3 chamber design is based on our BSC2 chamber and allows interface methods of slice maintenance at room temperature on a compound microscope stage.

• Slices supported in removable template
• Interchangeable templates allow single or dual channel operation
• Template design with diamond shaped flow cell for perfusion of slices with a small dead-space.
• Custom designed templates available.
• Coverslip glass base allows for high quality optical imaging with normal condenser optics.

The MS3 chamber is constructed from clear acrylic having a diameter of 100mm, height is 20mm. It is normally arranged on the microscope stage with an adaptor plate to allow the optical base of the chamber to be in close proximity to the microscope condenser optics for optimal visualisation. The slices rest in flat channel which has a central coverslip base 20mm in diameter. By placing various types of templates which have an inlet and exit well for perfusion solution, fluid flows in a narrow diamond shaped channel above the coverslip base whilst a high oxygen tension is maintained above it. The slices normally rest on a piece of  lens tissue while being perfused from one end of the insert.

Perfusion solution height is adjusted at the exit well to maintain interface mode. This is done by arranging lens tissue to wick solution into the exit well where it is removed by a tube attached to a suction line / peristaltic pump system. The pre-moistened carbogen gas enters from two inlets at the bottom of the chamber and is then deflected by a profiled acrylic lid on to the surface of the interface slice preparation resting in the central area of the glass coverslip. At the exit well perfusion solution can be collected for re-circulation or analysis. The half circle profiled acrylic lid allows access for stimulating and recording electrodes. Provision is made for a reference electrode wire to enter the proximity of the insert.

Microscope Interface Diagram
View  Larger Image


Parts Description

A. Deflected lid
B. Cut-out in lid for access to slices
C. Template
D. Exit hole for perfusion solution
E. Main body of MS3 chamber
F & G. Port holes for entry of humidified carbogen gas mixture
H. Glass coverslip base and resting place for slices where humidified carbogen gas is directed by lid [A] in direction shown by arrows [I].

Buy NowDownload Brochure

Top Home Credits Privacy Terms Copyright

©2006-2016 AutoMate Scientific, Inc.