Proportional Temperature Controller
Proportional Temperature Controller PTC03 for Quiet Electrophysiology
Description
Proportional Temperature Controller (PTC03)
- Very low noise direct current output
- High output power for rapid heating
- Compatible with our range of heating devices
- Temperature control below ambient with optional Peltier Controller (PC01)
The PTC03 is a temperature control unit for use in conjunction with our brain slice chambers, perfusion solution heaters and an increasing range of other systems currently under development . The required temperature is set using the front control panel. Provision is also made to display the temperature from a monitor sensor if this is being used. At a setting of 40˚, with an ambient of 20˚C, full control is reached within 10 minutes when used with our submerged and interface mode slice chambers. The set temperature must exceed ambient by at least 2˚C.
For controlling temperature in noise-sensitive electrophysiology experiments.
Specifications
Readout Accuracy:
+/- 0.1˚C
Output Type:
D.C. proportional control
Power Requirements:
110/240V +/- 10% 60/50Hz, 50 W
Control Accuracy:
0.5˚C below set temp. max. diff.
Sensors:
Pt 100 platinum resistance grade B.
Dimensions / Weight:
120H x 200W x 280D / 4 Kg
Control Stability:
Max +/- 0.1˚C from control point.
Temperature range:
10 to 60˚C
Output power:
36 Watts max.
Additional information
Weight | 4 lbs |
---|---|
Line Voltage | 110V, 220V |