Siskiyou Manual microscope translator, 14.563″x12.25″

Description

Our economy MXMS-100 series microscope translators are designed to be stable XY translators for fixed stage experiments. MXMS-100 series translators have a full 25 mm of XY translation and use ball transfer pads in the back two bearing locations. These ball transfer pads have proven themselves as a solid alternative to full crossed roller translators. Our economy models are only available in manual versions and can be fitted with either 20, 40, 80, or 100 TPI adjustment screws with resolution from 20 µm down to 5 µm, respectively.

Please specify which pitch of adjustment screw you require when ordering. Replace -xx in the Model Number with the desired thread. Example: For a MXMS-125 with 40TPI adjustment screws, order Model Number MXMS-125-40.

MXMS-100 series stages can be sized to fit most microscopes. Please include the manufacturer name and model of your microscope when ordering.

Requires MXMS-xx screws and MXMS-K mounting kit – sold separately.

Specifications

• 20-, 40-, 80-, or 100-pitch drive screws (sold separately)

• Compatible with fixed stage microscopes

• Time-tested design

• Maximum load 200 lbs, centered

• Travel / axis 1.0 inch (25 mm)

•Minimum controllable motion:
20 TPI 10 µm
40 TPI 5 µm
80 TPI submicron
100 TPI submicron

Manufacturer: Siskiyou
Catalog number: SD-MXMS-115-xx
Parent Category: Economy Manual Translator
Application: Siskiyou Mechanicals

For full web page, please see https://www.autom8.com/siskiyou-mechanicals-overview/economy-manual-microscope-translator

Download a brochure at https://www.autom8.com/wp-content/uploads/2016/07/Siskiyou-Translators.pdf